|
|
Possibilities of using recycled concrete as fine aggregate replacement in cement screeds
Nováková, Iveta ; Brožovský,, jiří (referee) ; Hubáček, Adam (advisor)
The bachelor thesis deals with summary of knowledge about cement-based screed with partial replacement of natural aggregates by recycled aggregates. Special emphasis is given to describing and studying characteristics of cement-based flowscreed. In this study are described feedstocks with requirements which they must meet and test methods for testing properties of screeds. One part is also given to practical application of cement-based flowscreed with partial replacement of natural aggregates by recycled aggregates.
|
|
|
Bulk properties of fine particulate solids as the function of the selected material parameters.
Slanina, Ondřej ; Roman,, Fekete (referee) ; Svěrák, Tomáš (advisor)
The theoretical part of the thesis focuses on the description of particulate materials and their mechanical behaviors with a focus on flow properties. Great emphasis is placed on measuring the shear properties using a Jenike shear machine, on the correct procedure for standardized measurement and evaluation using Mohr's circles. The theoretical part focuses on the characterization of particulate matter using a variety of methods available, such as visual, separation, sedimentation, surface methods and methods of scanning field and flow. The practical part is focused on the determination of flow characteristics and surface finishing of finely ground limestone Omyacarb VA with various grain sizes. The surface was modified using stearic acid and calcium stearate. Attention was paid to the influence of the concentration of surface-regulating substances on the flowability of the material. The flowability of commercially supplied material was compared with lab modified materials and the determination of the theoretical content of stearic acid or calcium stearate was accomplished. Shear properties were measured using the Jenike shear machine. The material was further tested by laser diffraction and SEM with EDS particle surface analysis and elemental surface mapping.
|
|
|
Research of soil reuse technology in the form of self-compacting grouts
Michalčíková, Magdaléna ; Kolář,, Karel (referee) ; Turček,, Peter (referee) ; Sokolář, Radomír (referee) ; Drochytka, Rostislav (advisor)
The increasing volume of waste of all kinds is currently a phenomenon of economically developed society and one of the problems of environmental protection. It is therefore imperative, in the interest of sustainable development, to monitor impacts related to the impact on our ecology, to regulate waste production by legislation and universally promote their reuse and recycling. Construction and demolition waste occupy a significant share of the total waste volume. This category also includes excavated soils. Recycling of these materials could significantly reduce the amount of landfilled waste and at the same time, these materials could be used as an important source of secondary raw materials. The doctoral thesis describes the research and development of the new technology of reuse soils in the form of self-compacting grouts. The result of the solution will be a suspension of optimal rheological properties, providing a perfect leaking around the stored utility networks. Emphasis will be placed on the study of the interaction of different types of soils with the stabilizers, flowable or plasticizing additives and its typical dispersible substance, including verification of the developed technology in situ.
|
|
|
The influence of micronized poloxamer on the flow and compaction of a model tableting mixture
Dunlap, Brooke Alexandra ; Šklubalová, Zdeňka (advisor) ; Svačinová, Petra (referee)
Charles University, Faculty of Pharmacy in Hradci Králové Department of: Pharmaceutical Technology Supervisor: Assoc. Prof. Zdenka Šklubalová, Ph.D. Consultant: Sebastien Bailey Student: Brooke Alexandra Dunlap Title of Thesis: The influence of micronized poloxamer on the flow and compaction of a model tableting mixture Lubricants are an important excipient used in the production of tablets, they facilitate powder flow during manipulation, prevent powder sticking to the press during compression, and aid in tablet ejection. In this thesis the effect of four different concentrations 0.5, 1.0, 1.5, and 2.0 % w/w of micronized Poloxamer 188 on a model tableting mixture consisting of a 1:1 ratio of Microcrystalline Cellulose (MCC) and Lactose (L) was tested to determine its effectiveness as a lubricant for tablet manufacturing. Flow through an orifice, angle of repose, Hausner ratio, compressibility index, dynamics of consolidation, and powder bed porosity were tested. There was no increase in flowability of the powder at any concentration of P188 in any test used, all mixtures showed poor or very poor flow behaviour. Compression process was evaluated according to the force displacement method at three different compression forces (5 kN, 7 kN, 10 kN) and special attention was paid to ejection force. P188 is an...
|
|
|
The influence of micronized poloxamer on the flow and compaction of a model tableting mixture
Dunlap, Brooke Alexandra ; Šklubalová, Zdeňka (advisor) ; Svačinová, Petra (referee)
Charles University, Faculty of Pharmacy in Hradci Králové Department of: Pharmaceutical Technology Supervisor: Assoc. Prof. Zdenka Šklubalová, Ph.D. Consultant: Sebastien Bailey Student: Brooke Alexandra Dunlap Title of Thesis: The influence of micronized poloxamer on the flow and compaction of a model tableting mixture Lubricants are an important excipient used in the production of tablets, they facilitate powder flow during manipulation, prevent powder sticking to the press during compression, and aid in tablet ejection. In this thesis the effect of four different concentrations 0.5, 1.0, 1.5, and 2.0 % w/w of micronized Poloxamer 188 on a model tableting mixture consisting of a 1:1 ratio of Microcrystalline Cellulose (MCC) and Lactose (L) was tested to determine its effectiveness as a lubricant for tablet manufacturing. Flow through an orifice, angle of repose, Hausner ratio, compressibility index, dynamics of consolidation, and powder bed porosity were tested. There was no increase in flowability of the powder at any concentration of P188 in any test used, all mixtures showed poor or very poor flow behaviour. Compression process was evaluated according to the force displacement method at three different compression forces (5 kN, 7 kN, 10 kN) and special attention was paid to ejection force. P188 is an...
|
|
|
Study of the influence of tablet mixture composition on the flow and consolidation properties
Ferechová, Daniela ; Šklubalová, Zdeňka (advisor) ; Macho, Oliver (referee)
Charles University, Faculty of Pharmacy in Hradci Králové Department of: Supervisor: Pharmaceutical Technology doc. PharmDr. Zdeňka Šklubalová, Ph.D. Consultant: Mgr. Jana Brokešová Student: Daniela Ferechová Title of Thesis: Study of the influence of tablet mixture composition on the flow and consolidation properties Good flow properties of a tabletting mixture play an important role in the manufacturing of tablets. Flow behaviour of the commercial (original) tabletting mixture with poor flowability was evaluated in this thesis. The main aim was to find alternative fillers that may improve its flow. The granulometric characteristics and flowability of eight types of lactose and microcrystalline cellulose and their binary mixtures were studied. In comparison to the original tabletting mixture, the proposed modified one with both original fillers were replaced with new ones showed significantly better flow properties with steady state flow through the hopper orifice having a diameter of 10 mm. The results were confirmed using powder rheometer. The lower shear stress necessary to achieve flow under different normal loads as well as approximately 72 times lower cohesion value were detected for the modified tabletting mixture.
|
|
|
Fractal aspects of flow and consolidation behaviour of microcrystalline cellulose.
Šofranková, Alexandra ; Šklubalová, Zdeňka (advisor) ; Svačinová, Petra (referee)
7 2 Abstract Charles University in Prague, Faculty of Pharmacy in Hradci Králové Department of: Pharmaceutical Technology Consultant: doc. PharmDr. Zdeňka Šklubalová, Ph.D. Student: Alexandra Šofranková Title of Thesis: Fractal aspects of flow and consolidation behaviour of microcrystalline cellulose The object of this diploma thesis was to study the flow and consolidation characteristics of three types of microcrystalline cellulose. The granulometric characteristics, including the linear fractal dimension, were estimated using the optical microscopy. The bulk and tapped density, the angle of repose and the flow rate through an orifice of the hopper were evaluated. True density of the materials and the porosity of a loose powder bed were determined by helium pyknometry. The changes of density by the gravity consolidation were studied; the relationship of Hausner ratio on the number of taps describes best the differences in the consolidation behaviour of the substances. Modelling the consolidation kinetic by the exponential law allowed to determine the parameter N1/2, which shows the number of taps needed to reach one half of the powder volume reduction. The values of N1/2 within a range of 6,9-18 correlated well with the particle size of the used types of microcrystalline cellulose.
|
|
|
Homogenization of powder blends using a Turbula mixer.
Litošová, Martina ; Šklubalová, Zdeňka (advisor) ; Mužíková, Jitka (referee)
1 Abstract Charles University, Faculty of Pharmacy in Hradci Králové Department of: Department of Pharmaceutical Technology Supervisor: Doc. PharmDr. Zdeňka Šklubalová, Ph. D. Consultant PharmDr. Karel Palát, CSc., Mgr. Žofie Trpělková Student: Martina Litošová Title of Thesis: Homogenization of powder blends using a Turbula mixer. In this experimental work, the influencing of the homogeneity of the powder mixture of acetylsalicylic acid (ASA) and microcrystalline cellulose (Avicel PH102) due to the rotational speed of the mixing container in a range of 23−101 rpm, and the mixing time was studied using the Turbula shaker mixer. Within time interval 2-62 minutes, the content of ASA in samples was measured by near-infrared spectrometry. The expression of standard deviation was used to evaluate the homogeneity of samples. The best results were detected at a rotational speed of 34 rpm within time interval of 14−30 min.
|
|
|
Flow equation. Sorbitol.
Čermáková, Hana ; Šklubalová, Zdeňka (advisor) ; Mužíková, Jitka (referee)
Charles University in Prague, Faculty of Pharmacy in Hradci Králové Department of: Pharmaceutical technology Consultant: doc.PharmDr.Zdeňka Šklubalová, Ph.D Student: Hana Čermáková Title of Thesis: Flow equation. Sorbitol In this diploma thesis, the granulometric, bulk and consolidation properties of sorbitol for direct compression are studied. The effect of particle size on bulk and tapped density, angle sprinkles and the flow rate through the model conical hopper with a different orifice diameter are examined. The relationship of the flow rate (g/s) of particle size fractions on the orifice diameter is modelled by the Jones-Pilpel equation with the accuracy of the flow rate prediction approximately 10 %.
|
|
|
The study of influence of the measurement method on static angle of repose of free-flowable excipients
Mrázková, Aneta ; Šklubalová, Zdeňka (advisor) ; Svačinová, Petra (referee)
Charles University, Faculty of Pharmacy in Hradci Králové Department of: Pharmaceutical technology Supervisor: doc. PharmDr. Zdeňka Šklubalová, Ph.D. Consultant: Mgr. Žofie Trpělková Student: Aneta Mrázková Title of Thesis: The study of influence of the measurement method on static angle of repose of free-flowable excipients. Good flow and consolidation properties of powders represent significant characteristics of pharmaceutical excipients They are important for manufacturing of powders into solid dosage forms. Flow behavior of 6 free flowing excipients was evaluated in this diploma thesis. The main target was a study of the influence of the masurement method and the orifice size of a conical hopper on static angle of repose (AOR). The automatic tester and the prototype for measuring AOR having orifice sizes in a range of 6-15 mm were used for the measurement. A significant difference between the results of these two methods (P <0.01) was observed. The decrease in AOR was detected when increased the orifice diameter, the effect was significant (P <0.01) only in automatic tester for two out of six measured powders. Surprisingly, the significant influence of the orifice size on AOR was registered for a sweetener Palatinose with protype equipment.
|
guest ::
